Do you know the difference between a Cam Show and a Cam Pro? There are many differences between the two types of Camshafts. Which one should you use?
Differences between the two types of camshafts
The differences between a Cam Show and a Cam Pro are, to say the least, vast. But, they are not all that significant when it comes to performance. In this article, we will compare the differences between the two types of camshafts.
The difference between a Cam Show and a Cam Pro is pretty simple. A Show Cam has been subjected to the process of “Ovulation Testing”. This process is not difficult at all and involves taking a sample of the camshaft material, checking for impurities and checking for slippage. After this process, the tube will then be subjected to the firing cycle.
As the steel tube is fired up, its operating point moves into the bottom of the chamber. From there, the piston hits the firing device at a certain velocity, which is determined by the car’s design. This cycle occurs repeatedly until the correct amount of pressure is achieved.
Isolate impurities in the products
What this means is that the conditions that existed in the steel tube before the firing cycle cannot exist after the cycle has occurred. The cycle is repeated multiple times to eliminate slippage that occurs during the firing cycle.
On the other hand, a Show Pro has had its metal product’s valve and the element inserted. This gives the product the opportunity to undergo the impurities in the cylinder and have it evaluated by “Ovulation Testing”. This is an important step because this gives the user confidence that the material has been “performed” by another shop and is functional.
Now, you may ask, what makes a Cam Show differentfrom a Cam Pro? To answer this question, we need to take a look at the process that’s been discussed above. How does it work? Well, this process is done to isolate impurities in the products of the shop who made the camshaft.
How the shop that made the product?
What happens next is that, the firing device is moved further into the chamber. From there, it will continue the cycle for an additional 10 minutes. This process takes place hundreds of times over the production cycle.
The results that are obtained from this process are very important to the owner of the company. This is because this is how the shop that made the product can prove that their product has passed through the process of “Ovulation Testing”. Furthermore, it also proves that the product is functional.
Side note: If you are looking for a high performance camshaft, you should get one that has undergone the process of “Ovulation Testing”. This is very important if you want to achieve the performance level you desire. So, if you are considering investing in high performance camshafts, you should go out and get one that has undergone the process of “Ovulation Testing”.
Claim higher performance levels for their product
There are many shops who are trying to duplicate the “Ovulation Testing” process to help them claim higher performance levels for their product. Most camshafts do not actually perform the process of “Ovulation Testing”, but you can often find ones that claim they have, which is where you should be looking for.
Regardless of which type of camshaft you purchase, you should get one that has been certified to meet your performance levels. Take the time to educate yourself on the process that has been outlined above.